Development of Swansoft-Based CNC Milling Simulation Module for Vocational Students
Untuk siswa SMK Negeri 1 Tuban
DOI:
https://doi.org/10.59211/mjpjetl.v4i1.411Keywords:
cnc milling, learning module, R&D, SwansoftAbstract
The limited availability of actual CNC machines and high safety risks pose major obstacles to CNC programming education in vocational high schools. This study was conducted with the aim of developing a valid, practical, and effective Swansoft-based CNC Milling Simulation Learning Module to enhance the understanding of vocational high school students, particularly at SMK Negeri 1 Tuban. The study employed a Research and Development (R&D) model using the Define, Design, Develop, Disseminate (4D) framework. The test subjects were 33 students from class XI TP-3 at SMK Negeri 1 Tuban. Research instruments included validation sheets for media, language, and content experts; a comprehension test questionnaire; an implementation observation sheet; as well as pre-test and post-test questions. Validation results showed a percentage of 89.71% from media experts, 87.50% from language experts, and 86.46% from content experts, all categorized as "Very Good." The student comprehension test achieved a percentage of 87.47% in the "Very Good" category, and the implementation observation indicated that 94% of students were able to follow all practical steps well. The effectiveness test results showed a significant increase in the average score from 68.2 to 90.8, with an average N-Gain of 0.71 in the "High" category. The Swansoft-Based CNC Milling Simulation Learning Module was declared valid, practical, and effective for use as a self-directed learning medium for vocational high school students.
Downloads
References
[1] R. Eko, “OPTIMASI PARAMETER PEMROGRAMAN CNC MILLING TERHADAP PROSES KERJA YANG EFESIEN DENGAN SIMULASI SWANSOFT CNC MILLING,” PhD Thesis, Universitas Muhammadiyah Ponorogo, 2023. Diakses: 30 April 2026. [Daring]. Tersedia pada: https://eprints.umpo.ac.id/11817/
[2] K. Kumar, C. Ranjan, dan J. P. Davim, CNC Programming for Machining. dalam Materials Forming, Machining and Tribology. Cham: Springer International Publishing, 2020. doi: 10.1007/978-3-030-41279-1.
[3] “Lap Ii Pemrograman Cnc Milling Dengan Software Swansoft Cnc Simulation Sistem Operasi Fanuc Oi M Nc [34wmk857jml7].” Diakses: 30 April 2026. [Daring]. Tersedia pada: https://idoc.pub/documents/lap-ii-pemrograman-cnc-milling-dengan-software-swansoft-cnc-simulation-sistem-operasi-fanuc-oi-m-nc-34wmk857jml7
[4] Asmungi, “Menyiasati Fasilitas Laboratorium CNC bagi SMK yang Berkekurangan Finansial,” J. Tek. Ind. HEURISTIC, vol. 12, no. 1, hlm. 53–59, Apr 2015.
[5] K. A. Pangestu, “Pengembangan media pembelajaran interaktif nc/cnc menggunakan software swansoft cnc simulator pada kompetensi keahlian bidang Teknik Mesin / Kukuh Andreng Pangestu,” diploma, Universitas Negeri Malang, 2022. Diakses: 30 April 2026. [Daring]. Tersedia pada: https://repository.um.ac.id/269018/
[6] W. M. Kusuma, S. Setuju, dan D. Ratnawati, “Development of learning media lathe machining based on animation video,” J. Taman Vokasi, vol. 7, no. 1, hlm. 54–61, Jul 2019, doi: 10.30738/jtv.v7i1.4779.
[7] P. P. Kuantitatif, “Metode penelitian kunatitatif kualitatif dan R&D,” Alf. Bdg., 2016, Diakses: 30 April 2026. [Daring]. Tersedia pada: https://www.researchgate.net/profile/Hery-Purnomo/publication/377469385_METODE_PENELITIAN_KUANTITATIF_KUALITATIF_DAN_RD/links/65a89006bf5b00662e196dde/METODE-PENELITIAN-KUANTITATIF-KUALITATIF-DAN-R-D.pdf?__cf_chl_tk=nCoUyuEGaYY_sI703pQR98sN2_hY3g4HU1pMZwpG_us-1739947478-1.0.1.1-LdQU9dWiAysvCtpvd4Uu6KNXvu7bCNUUxgfLLZulaEo
[8] S. Thiagarajan, “Instructional development for training teachers of exceptional children: A sourcebook.,” 1974, Diakses: 30 April 2026. [Daring]. Tersedia pada: https://eric.ed.gov/?id=ED090725
[9] M. F. R. Pratama, “Pengembangan media pembelajaran berbasis video youtube dengan software swansoft cnc pada mata kuliah cnc dasar di Universitas Negeri Malang / M. Farih Rizki Pratama,” diploma, Universitas Negeri Malang, 2023. Diakses: 30 April 2026. [Daring]. Tersedia pada: https://repository.um.ac.id/313924/
[10] A. P. Afandi dan N. A. Susanti, “PENGEMBANGAN MODUL PEMBELAJARAN CNC MILLING MENGGUNAKAN SOFTWARE MASTERCAM X9 PADA MATA PELAJARAN CNC DI JURUSAN TEKNIK PEMESINAN SMKN 1 BLITAR,” 2022, Diakses: 30 April 2026. [Daring]. Tersedia pada: https://ejournal.unesa.ac.id/index.php/jurnal-pendidikan-teknik-mesin/article/view/45072
[11] R. R. Hake, “Interactive-engagement versus traditional methods: A six-thousand-student survey of mechanics test data for introductory physics courses,” Am. J. Phys., vol. 66, no. 1, hlm. 64–74, 1998.
[12] D. Sugiyono, “Metode penelitian pendidikan pendekatan kuantitatif, kualitatif dan R&D,” 2013, Diakses: 30 April 2026. [Daring]. Tersedia pada: https://digilib.unigres.ac.id/index.php?p=show_detail&id=43
[13] E. D. Kurniawan, N. Nopriyanti, R. Hermawan, dan P. I. Yanti, “Pengembangan modul pembelajaran berbasis stem pada materi cnc milling simulator,” J. Pendidik. Tek. Mesin, vol. 10, no. 2, hlm. 204–216, 2023.
[14] M. B. ULUM, “Pengembangan Modul Cnc Semi Pu Gsk 928 Tc Untuk Meningkatkan Aktivitas Dan Hasil Belajar Siswa Kelas XII Smk Ypm 1 Taman Sidoarjo,” PhD Thesis, State University of Surabaya. Diakses: 30 April 2026. [Daring]. Tersedia pada: https://www.neliti.com/publications/249936/pengembangan-modul-cnc-semi-pu-gsk-928-tc-untuk-meningkatkan-aktivitas-dan-hasil
[15] A. Arsyad, “Media pembelajaran.” Jakarta: PT Raja grafindo persada, 2011. Diakses: 30 April 2026. [Daring]. Tersedia pada: https://www.academia.edu/download/30484693/jiptiain--umarhadini-8584-5-baii.pdf
[16] “The Influence of Video-Based Media and Simulator CNC Milling Lite Applicati.” Diakses: 30 April 2026. [Daring]. Tersedia pada: https://journals.indexcopernicus.com/search/article?articleId=4396032
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Mella Karisma Fauzianti, Saifuddin Karim, Marsono
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors grant the journal the right of first publication. which permits unrestricted use, distribution, and reproduction in any medium, provided that the original work is properly cited. Authors are responsible for ensuring that any third-party materials included in their work have proper permissions.
